Fiesta ST Forums banner
Showcase cover image for 2008 Ford Fiesta ST

General Information

Fiesta ST
colorado red
42500 Miles
NameDescriptionCost PriceInstall PriceRating
manifold4-1 milltek evo manifold£322.00£80.0010 / 10
manifold4-1 milltek evo manifold£322.00£80.0010 / 10
air intakek&n typhoon£225.00£0.0010 / 10
60mm throttle body60mm throttle body£95.00£0.0010 / 10
powerflex bushesfull front bush kit.£93.95£156.6010 / 10
rocker cover badgeford duratec st badge.£30.00£0.0010 / 10
carbon mods rocker coverrocker cover£82.00£0.0010 / 10
spark plugsnology spark plugs£36.00£0.0010 / 10
strut bracerear strut brace£65.00£60.0010 / 10
milltek hi flow sports catmilltek hi flow sports cat£330.00£0.0010 / 10
twin exit 90mm exhaust90mm imola tail pipes£398.00£398.0010 / 10
dmb overlaysfront badge grill£15.00£0.0010 / 10
rs bonet bonet vents£40.00£0.0010 / 10
typhoon air intaketyphoon air intake£225.00£0.0010 / 10
dmb gel badgeunion jack badge with poppy£7.70£0.0010 / 10
battery cover£10.00£0.008 / 10
brought from main dealer november 2009,fitted full milltek system & decat,typhoon air filter remaped dreamscience race plus ap coil overs 40 mm lowerd,12.5 mm spacers at rear,gloss black team dynamics wheels,when i brought the car it had 4.123 miles on the clock.the 60mm throttle body i have thanks to maxbull. new power run to be done saterday 5/3/2011 before the throttle body goes on,then the following week it will be done again.i will post the results once i have them.power run number one 182.4bhp torque 145.9 next week saterday 12/3/2011 second result i will let you all know,after the second power run i will be returning my car back to stock,that means there is going to a third power run 19/3/2011,once i have the results i will let you all know.second power run results.175.7bhp torque150.1the mid range torque has gone up with the 60mm throttle body fitted,also the fueling levels are much better. third power run results.175.5bhp torque 146.6 the fueling levels are all over the place also the mid range torque has gone,back to dreamscience race plus,if you have the same parts as me have a custom map or the dreamscience stratagem ultra with this unit you have three programes to play with.the engine managment light comes on all the time with the standard programe.i hope you find this information off badge for engine bay,carbon rocker cover on order.full front powerflex bushes fitted 1/4/2011.nology spark plugs fitted.21/4/2011power run done at jamsport.30/4/2011 rear strut brace fitted today.the rear end is spot on.thanks to the team at jamsport.milltek hi flow sports cat fitted 22/5/ pictures taken today.i have been working on this for some time my car was finished on 16/07/2011.a big thank you to gates off stevenage & r tec in st albans & also rob at scc performance for geting the rear valance sent over from germany,with out there support & help none off this would had been possible.a picture off some off the pipe work underneath my car.gel overlay car is on youtube under the name fiesta st twin exit exhaust.a little splash off colour.sprayed upper grill more pictures in my project thread.two new videos off my car on the bonet vents waiting to get booked into work shop.a little update my project thread has been removed,i will posting a new one at a later date.typhoon air intake now sprayed colorado red.r/s splitter fitted 18/02/2012.<br />i had a new power run done on the 03/12/2012.<br />bhp 177.5 the torque 147.7 this was done with the twin exhaust.the meet on friday the 6th april 2012 was great.the vents are done at last,great job done by gates off stevenage.colour change front plastics,will post new pictures when finished.fitted new colour coded plastics 08/07/2012 a couple off new pictures all ready for ford fair 2012.spray mist washer jets colour coded fitted 09/09/2012 stainless steel led door sills fitted



1,018 Posts
aww so thats the latest mod then!!!!!! very nice - make sure you can make the next meet coz I wanna sit in that car!!!!!!!!!