Fiesta ST Forums banner
decat
1-14 of 14 Results
  1. Mk7 Engine, Exhaust and Induction
    I am currently looking to buy a Milltek system, but unsure if to go Catback or Turboback? Are one of these worse off than the other or? I will be running a milltek decat aswell Catback: http://www.pumaspeed.co.uk/showdetails.jsp?productID=16030&manufacturerID=1&makeID=10&modID=326 Turboback...
  2. Mk7 Engine, Exhaust and Induction
    Was going to go for the Miltek Non Res system, but most people say it isnt too loud. I want my exhaust system to be loud (personal preference, dont judge) but at the same time... not to the point where it sounds like a clapped out corsa B on maccies. Preferably a Catback system along side a Decat.
  3. Mk7 ECU Remapping Software and Tuning
    Looking to get the Peron Stage 2 Remap with the Crackle and Pop Decel (Link below) Just want to know the negatives about the Crackle and pop Decel, is it bad for the car? does it damage anything? If you're going to reply with "Why would you run such a chavy map which sounds pathetic"... dont...
  4. Fiesta ST MK6 Discussion
    Hi all, i sold my moondust silver st about 3 years ago and i have regretted it ever since. I spent alot of money on that car and i know it was right, so i would love to try and find who owns it now. If anyone knows of its where abouts or any clues what so ever please help me. Registration...
  5. Fiesta ST MK7 Discussion
    Fitted decat pipe to my 14 plate mountune mp215 but want to keep exhaust "looking" standard, wanted it to pop but I'm being shown up by my friends standard '98 golf gti 8v that doesn't have to try,
  6. Mk7 Engine, Exhaust and Induction
    Fitted decat pipe to my 14 plate mountune mp215 but want to keep exhaust "looking" standard, wanted it to pop but I'm being shown up by my friends standard '98 golf gti 8v that doesn't have to try,
  7. Fiesta ST MK7 Discussion
    Fitted decat pipe to my 14 plate mountune mp215 but want to keep exhaust "looking" standard, wanted it to pop but I'm being shown up by my friends standard '98 golf gti 8v that doesn't have to try,
  8. Mk6 Engine, Exhaust and Induction
    I've recently fitted a full Milltek inc decat, fitted a lambda spacer on the post cat sensor so it sits out of the gas flow, it's been absolutely fine for about a month but yesterday my EML flagged up PO141 Lambda heater circuit malfunction Now i understand the sensor has to run at a certain...
  9. ND Tuning
    Hi guys! We have a another great deal here for you! Cobra ST180 Downpipe/Decats are in stock for fast dispatch and we are offering 20% off and FREE shipping as a forum deal- While stocks last! http://www.nd-tuning.co.uk/ford-fiesta-st180/1273-ford-fiesta-st180-cobra-front-pipede-cat.html...
  10. Mk7 Engine, Exhaust and Induction
    Hi, I have a fiesta st180 on finance at the moment and I want to modify the performance without having to permanently change the car. I want to install a decat pipe to the exhaust system and was wandering whether there is any welding involved or is it a simple task of gaskets and nuts and bolts...
  11. Fiesta ST MK6 Discussion
    Alright, Had the cat back done on my ST, looking for a second hand milltek de cat manifold. Can anyone help please? :D
  12. Mk6 Engine, Exhaust and Induction
    As standard, the Mk6 Fiesta ST's exhaust system is like this; Engine > gasket > Manifold branch > flexi > gasket > cat all the way to back box is 1 piece. There is a kink right after the standard cat too, which impacts on the gas flow. Further down you will see that sports cats and decats are...
  13. Mk6 Engine, Exhaust and Induction
    Hi guys, Now before I get shot lol, I have done some searching went back about 8 pages of searching mongoose. I found lots of use full info but nothing a long the lines of what I was thinking. I've been doing some searching around for exhausts, I wanted something that has a bit of noise web...
  14. Mk6 Engine, Exhaust and Induction
    Hi All, Just a quick question. I currently have a piper catback, but want to get a decat pipe. I've seen a miltek decat pipe for sale that I'm considering getting, but before I buy it I wanted to check.... can you mix and match the brands together, or are they all different diameters? Any...
1-14 of 14 Results
Top