Fiesta ST Forums banner
1 - 1 of 1 Posts

·
Premium Member
2005, MK6 ST150 (pre face lift )
Joined
·
1,305 Posts
Hi Simdash,

I would agree with dannyboy, initally, but looking at the picture theres not much to get hold of...
I don't know what torque the bolt would have been tightened to, but I think i;'d try getting a centre punch onto the side of the bolt and tapping round.
If that dosn;t work you could try a hacksaw blade in from the side, you'd probably destroy the casing, probably best to source a new casing or check out what they cost first
Once the head is off the bolt you should be able to lift the casing off the bolt and get some grips on the remainder of the bolt and wind out
Good luck mate
 
1 - 1 of 1 Posts
Top