Fiesta ST Forums banner
1 - 1 of 1 Posts

·
Registered
2019 Mk8 Fiesta ST-3 Mountune m260
Joined
·
133 Posts
Some other ideas that may (or may not) help:
  • If there's enough of the Torx head left, try tightening it to get the thread moving before trying to wind it back out.
  • If you use the freezer spray, try warming the engine up then concentrate the freezer spray on just the screw as much as possible.
  • File a straight edge on the screw head to make it easier to hit (with a punch it screwdriver) or grip onto
  • Depending how bad the head is, you may be able to get a larger (cheap/disposable) Torx bit and hammer it into the head.
 
1 - 1 of 1 Posts
Top