Hi
Got home today and mines gone lol. If anyone has one they wish to part with please let me know
Thank you
Got home today and mines gone lol. If anyone has one they wish to part with please let me know
Thank you
2005, MK6 ST150 (pre face lift ), 2005, MK6 zetec S
Joined
·
1,675 Posts
Hi Patriotk,
I've got a couple of blue covers, not sure if o/s/f, i'll check in morning and let u know.
Al.
Awesome thank you ☺
2005, MK6 ST150 (pre face lift ), 2005, MK6 zetec S
Joined
·
1,675 Posts
Hi Patriotk,
Failed again, I can't even find the bag I've got all the covers in, I'll keep looking, but have you considered the lazer printed covers, they spray up pretty well and are far cheeper than the OEM ones.
Al.
I did see them but never sure about painting them. Although in the last half hour I have had a breaker come back to me with one but wants £40 plus postage which seems a bit steep.
I was told yesterday though that a rear one fits if you remove the middle clip and there's quite a few of them online. Not sure if it's true or not lol
2005, MK6 ST150 (pre face lift ), 2005, MK6 zetec S
Joined
·
1,675 Posts
Hi Patriotk,
Wow that is expensive - they normally go for £25ish on ebay
As far as painting, you would just clean up the moulding with fine wet & dry paper, clean up, spray with plastic primer, go over again with wet & dry, clean up, spray with top coat then with clear coat.
You can get kits matched to your paint code.
found the covers, the only doubles I've got are n/s, ( in red ) sorry, but the answer to your question, yes if you cut the centre lug off a rear will fit the front hole - the front lug on the front cover is longer than that on rear so a rear will fit the front, but a front won't fit the rear
Al.
Awesome thank you. The rear ones are about £25 on eBay so that'll be my way forward. Although I will also fix it in place so I don't lose it again 😃Hi Patriotk,
Wow that is expensive - they normally go for £25ish on ebay
As far as painting, you would just clean up the moulding with fine wet & dry paper, clean up, spray with plastic primer, go over again with wet & dry, clean up, spray with top coat then with clear coat.
You can get kits matched to your paint code.
found the covers, the only doubles I've got are n/s, ( in red ) sorry, but the answer to your question, yes if you cut the centre lug off a rear will fit the front hole - the front lug on the front cover is longer than that on rear so a rear will fit the front, but a front won't fit the rear
Al.
1 - 7 of 7 Posts
Join the discussion
