Fiesta ST Forums banner
1 - 8 of 8 Posts

Premium Member
470 Posts
Discussion Starter · #1 ·
Following on from the sale of Red MR200, thread found below, here is the newest member of my tour around the Mountune MR200s 😆

Mart.'s Colorado Red ST150 Mountune MR200 (2nd Attempt)

This is my 3rd MR200 and recently owned another for a shirt stint to make it 4 😆

So why the change?
I was never looking to swap out from my red one having spent so much time and effort on it, but when this came up in white, lower miles, and a lot of the work done which I would have eventually got around to doing anyway it made sense in my mind. Especially with some of the mods that had been put onto it. It also cost me nothing to get out of the red one and into this once I had sold parts from both cars and finally ended up with one.

The red one has gone to a friend so I will still get to see it!

Spec of the car when I picked it up:

66k miles
3 owners from new
Full history

Engine bay/performance:

  • Mountune I4 inlet powder coated in yellow with Mountune writing in black with genuine Mountune gasket and certification
  • Genuine 60mm throttle body
  • Mountune carbon CAIS (Genuine Mountune carbon lid, samco hoses in Mountune yellow)
  • Piper cams, springs and retainers fitted by Mountune, receipt and booklet to prove this is a real MR200
  • Full scorpion de-cat resonated system with heat wrapped manifold
  • Mountune exhaust rubbers
  • Mountune billet aluminium oil cap
  • Mountune washer bottle cap
  • Mountune lower torque mount
  • Mountune short shifter
  • Mountune HT leads
  • Black powder coated alloy coolant tank with mishimoto genuine carbon cap
  • JS performance PAS relocation kit with new genuine Ford feed and return lines
  • JS performance ancillary hose kit
  • Roose motorsport pcv hose
  • Rebuilt gearbox 5,400 miles ago
  • 3J platted diff rebuilt 5,400miles ago
  • TTV lightend flywheel
  • New LUK clutch and concentric slave fitted 400 miles ago
  • Both powerflex upper poly bushed engine mount inserts
  • New genuine Ford battery
  • Genuine carbon engine cover
  • Genuine carbon fuse box cover
  • Genuine carbon fuel rail cover
  • Genuine carbon battery cover
  • NB styling bonnet gas struts
  • 20mm bonnet spacers
  • Engine bay wire tuck
  • Yellow washer hose


  • Front Lower arm and rear beam bushes powerflex polybushed road series
  • Front ARB D block bushes powerflex polybushed road series
  • BC BR racing coilovers done 200 miles
  • OMP strutbrace
  • 10mm rear axle spacers anembo engineering
  • Fully undersealed underneath

Wheels and brakes:

  • Mountune 17" alleggerita HLT wheels with Mountune carbon centre caps wrapped in toyo r888r tyres
  • Mountune nuts and locker set
  • ST170 brake setup all round tarox discs and ferodo ds2500 pads with HEL braided lines


  • Mountune mats
  • Custom carbon effect Mountune mr200 clocks with white led screen
  • White interior led conversion
  • AEM multi gauge and vent pod
  • Custom genuine carbon skinned centre dash
  • Custom mr200 genuine carbon door kick plates
  • Mountune gear ****
  • ZPO extended shifter
  • Mountune gear gaiter with carbon surround
  • Hydro dipped inside door handles, air vents, clock trim, wing mirror trims
  • Hydro dipped customer heater panel with white LED
  • JP cages bolt in show cage
  • Rear seat delete with custom flat boot build in alcantara with JBL 12” sub with JBL amp
  • Pioneer sph-da120 double din headunit
  • All pillars and headlining in alcantara
  • Rear track car door cards covered in alcantara
  • Yellow kolourkoncept seatbelts
  • Led strip footwell lights
  • Vent cup holder
  • Coin slot phone holder
  • OMP leather GP steering wheel with genuine carbon horn badge
  • NRG carbon quick release with NRG short boss
  • Focus black sun visors


  • Genuine new Ford detangoed and painted gloss/matt black headlights
  • Autobeam bulbs all round inside and out
  • Yellow led fog light bulbs
  • Smoothed front bumper, big front mouth grill wrapped in gloss black
  • Gloss black plastics
  • Maxton design full kit includes, front splitter V2, rear diffuser, side skirts, rear spats, and spoiler extension V2
  • Genuine carbon fuel cap cover
  • Front and rear genuine carbon Ford badges
  • Front and rear DnB ST mr200 badges
  • Genuine Mountune and mr200 badge on rear
  • Genuine carbon door pillar trims
  • Genuine carbon wing mirror covers
  • Black Stubby Ariel
  • Genuine carbon bonnet lip
  • Climair wind deflectors
  • White underglow kit
  • Custom Mountune side stripes
  • Rear wiper delete
  • Frozen white boot lock cover
  • Frozen white mist jets
  • Fuel cap caddy


King race bottom end bearings, Mountune HT leads, 15l of castol GTX 5w30 engine oil , 2l of millers 75w90 gearbox oil, Original radio and code, Standard throttle body, Spare coolant tank cap, K&n air filter cleaner and oil, Aero catches, C spanner’s for coilovers, Spare black wheel weights, Various spare clips and fixings, Genuine carbon door handle covers, Parcel shelf.

On the way back from picking it up!

Car Wheel Tire Land vehicle Vehicle

Pics from Ford fair which was the first show and was able to attend with Mountune. Car picked up a rosette for top 10 ST.
Wheel Car Tire Land vehicle Vehicle

Wheel Sky Cloud Tire Vehicle
Vehicle Automotive tire Hood Automotive lighting Grille

One of the engine bay

Automotive lighting Hood Grille Automotive tire Motor vehicle

Premium Member
470 Posts
Discussion Starter · #2 ·
Swapped a number of parts over from my red MR200 consisting of:

  • Recaro Sportster CS seats
  • red5 carbon gear **** cover in carbon
  • All panther black interior plastics from paint mods
  • Wing mirror covers from paintmodz in panther black
  • Wipers in panther black from paintmodz
  • Screw and washer kit front and rear lights
  • Double rear LED lights for boot

Parts removed and sold from white one:
  • roll cage (not necessary for me)
  • r888r replaced for MIchelin pilot sport 4 (noisy for a car not on track and nervous in properly poor weather)
  • genuine carbon centre console
  • mountune gearknob and shifter extender (throw too long compared to standard).
  • scorpion exhaust replaced with a full mountune system Inc sports cat.
  • sold carbon door handle covers
  • sold steering wheel and replaced with custom standard one
  • sold rear track car door cards and replaced with standard
  • removed bonnet spacers

One of the best parts I've purchased recently has to be the custom steering wheel from Sebastian Okon. Paired up with red5 carbon badges.

Pics below of the interior once finished.
Speedometer Vehicle Car Motor vehicle Light
Speedometer Motor vehicle Steering part Plant Automotive design

Exhaust being swapped 2 days before ford fair

Vehicle Car Tire Automotive tire Automotive lighting

One last pic of both cars together

Tire Wheel Car Vehicle Hood

Fancied pinstriping the splitter kit and really pleased with how it turned out:

Wheel Tire Car Vehicle Plant
Wheel Tire Car Vehicle Window

Attended ford power live at brands with mountune

Wheel Tire Car Land vehicle Sky
Car Tire Land vehicle Vehicle Wheel

Wheel Tire Car Land vehicle Vehicle


Premium Member
470 Posts
Discussion Starter · #3 ·
I'm still undecided on what to do with the rear. I have purchased a clubsport net and bar from JC clubsport which I like but may opt to put rear seats back in at some point
Automotive tail & brake light Hood Automotive tire Automotive lighting Trunk

I've also got a Mountune Alcon BBK to fit over the winter, which is another rare part I have managed to get a hold of. Had them refurbed at BCS automotive local to me.

Sports equipment Vehicle Automotive lighting Hood Motor vehicle

Plans after that will be to just keep it clean, use it at the weekend, and get to shows with it.

I want to get the rocker cover painted gloss black to remove the plastic effect, and am looking into getting the seat backs painted aswell

Have a few other things I want to try out but they can wait till next year now whilst the car is Garaged over winter and SORN.
1 - 8 of 8 Posts