People have had a fair bit of probs with the scuff plates failing,personally I wouldn't bother as your not missing much.ps they are expensive to replace.

 

A while back on here someone posted a link to the US accesory catalogue which had the sills for $200 for the pair, instead of £2-300 each here.

It seems the design has been changed due to a fault but, the new style don't look anywhere near as good
http://accessories.ford.com/kit-10592.html

If you could get the front or back over off you might be able to fit LEDs but don't use a ribbon cable unless you can fit it without bending it around a corner. AdamST took some pics when he swapped his, it showed the supply plug was about half way along the sill under the trim.
http://www.fiestastoc.com/forums/topic/130538-illuminated-door-sills/page-2

 

Pointless 'feature', Australians had the right idea to not even give them as an option :lol:

 

They look cool though.

 

Did you ever get round to this bud?

 

There is an easier and cheaper way to get illuminated sill plates

Check out these from AutoBeam

 

There is an easier and cheaper way to get illuminated sill plates

Check out these from AutoBeam

received_1381801855187861.jpeg

This is what I'm planning but looking at a way of wiring them in as the 5 door ST doesn't have the connections

 

@Xfileswilly

Did you ever get round to this bud?

I wouldn't hold your breath waiting for an answer from them, they haven't been active since October 2014.

 

@bostin!
You seem know where stuff is. You got any ideas?

 

@Xfileswilly the AutoBeam kit comes with an adaptor to wire in via the footwell light

 

@Xfileswilly

@pop80_uk seems to know his way around the sill plates and would be worth asking for advice.

In the following post he said he was going to post a "how to" guide on them. He never did as far as I'm aware, but he visits the forum frequently even though he doesn't post as much now...

http://www.fiestastoc.com/forums/topic/241074-illuminated-sill-plates/?p=3293402

 

I'll give him a shout. Thanks

 

I'll give him a shout. Thanks

You're welcome :nice:

 

@Xfileswilly

@pop80_uk seems to know his way around the sill plates and would be worth asking for advice.

In the following post he said he was going to post a "how to" guide on them. He never did as far as I'm aware, but he visits the forum frequently even though he doesn't post as much now...

http://www.fiestastoc.com/forums/topic/241074-illuminated-sill-plates/?p=3293402

I'll give him a shout. Thanks

Im still working on the guide, and also a stock of upgraded sill plates.

I have a young family now so that takes up alot of my time.

Ive replied to this member and will help him out.